All MetalShaping - Hello from down under

All MetalShaping (https://allmetalshaping.com/index.php)

- Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)

- - Hello from down under (https://allmetalshaping.com/showthread.php?t=18109)

beaus

06-21-2018 02:00 AM

Hello from down under

Hey guys, just found this forum. My names Beau and I'm from NSW in australia. Have been working with mainly stainless pipe for many years now, mostly exhausts and intercooler piping, but a bit of mixed fabrication here and there. Just bought myself a panbrake and looking to start doing a bit more sheet metal work, came across this forum and thought I'd join as it looked like there was alot of knowledge and ideas here to learn from.

Thanks guys!

galooph

06-21-2018 02:04 AM

Welcome to the forum, Beau :)

Gojeep

06-21-2018 05:24 AM

Welcome mate, plenty of us Aussies on here too.

cliffrod

06-21-2018 06:22 AM

Welcome to the forum, Beau.

Peter Tommasini

06-25-2018 02:34 AM

Hi Beau welcome to the forum
Peter

All times are GMT -5. The time now is 12:14 AM.