All MetalShaping - Opening the door

All MetalShaping (https://allmetalshaping.com/index.php)

- Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)

- - Opening the door (https://allmetalshaping.com/showthread.php?t=3896)

NetNathan

06-30-2011 05:12 PM

Opening the door

Helloo from SoCal.
Here to get some info on slip rolling a 4"x.015 sheet of Moly into a .75 tube.
Should be a challenge.

All times are GMT -5. The time now is 07:22 AM.