Hello from Sweden
 

Hello.
My name is Anders Nilsson. I live in Sweden. I have been interested in metalshaping in about 10 years, but dont have that much practice. Still a beginner. Have build my own english wheel. I olso a planishing hammer, bead roller, shrink and stretcher, sheet metal break. And some hand tool. Want more shaping tools, but i have take a little at time. The project i working on now is a Mercedes 450 se, and is almost finnish with a volvo amazon (Think its only called 121 in US). The mercedes is now waiting on me to build a tractor driven compressor, so a can sand blast the floor, prior to epoxy paint. On the days a work as a service engineer.

Best regards Anders

hi anders welcome to metalshaping

Are the Anders who spent some time in he early 70s in ann arbor michigan ?

Welcome to Allmetalshaping Anders!:D

Hello Anders, Welcome to allmetalshaping.

David

Welcome to the site Anders, it would be nice to these some photos of your equipment that you have built :cool:

Sorry, but thats not me.
//Nilsson

Thanks.
Have your DVD. Liked it alot. Have some books but its easier to learn from a DVD. But a feel i have to asking olso, so i joined this community. Its hard to ask books and DVDs:)
//nilsson

Will upload some picture this weekend, so a can get some input. Build it from pictures in bookas and internet, so a have a little lack of advice, so its wheel with improvment needs:)

Thanks you all for welcome me!

//nilsson

Attachment 11802

Attachment 11803

Attachment 11804

Some picture of the english wheel a have built some years ago. The rod where the little wheel is attach, is a fork leg from aHonda cbr900. But a have alot of training to do.