Flipper_1938 is on here now
 

Hey guys.

I was directed here by a link on the HAMB that showed an awesome transmission tunnel.

I'm currently building a boat-tailed speedster from "almost scratch". The big pieces of the tail started out as a 54 Cadillac roof. I was hoping to put the rest of the body together out of found shapes, but I think that may be an unrealistic task. Metal shaping will be required.

Here's a link to what I've done with it so far.
http://www.jalopyjournal.com/forum/s...ghlight=roofus

Richard Ramsey

Welcome to Allmetalshaping Richard!:D

Welcome to the site Richard :cool:
Peter