All MetalShaping - Hi from John in southern colo

All MetalShaping (https://allmetalshaping.com/index.php)

- Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)

- - Hi from John in southern colo (https://allmetalshaping.com/showthread.php?t=5615)

tingeezer

03-01-2012 01:39 PM

Hi from John in southern colo

I found this site after searching the web looking for info on power hammers. This looks like a good place to learn. I've been messing with cars since I was 15, not sure if I've learned much since then but I keep trying. I have a pretty well equiped shop, lathe,mill,shear,press brake,mig and tig welders, shrinker/strecher and now a nibbler. I am in awe of some of the talent here, looking forward to picking up some pointers.:)

John

Joe Hartson

03-02-2012 10:46 AM

John, welcome, hope you enjoy the site and find it helpful. Thanks for joining us.

HEATNBEAT

03-02-2012 11:13 AM

Hi and welcome John!:)

Peter Tommasini

03-03-2012 06:02 AM

HI and welcome John
Peter

David Gardiner

03-03-2012 02:58 PM

Hello John, welcome to the forum.

David

All times are GMT -5. The time now is 01:54 PM.