All MetalShaping - The French Firebird

All MetalShaping (https://allmetalshaping.com/index.php)

- Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)

- - The French Firebird (https://allmetalshaping.com/showthread.php?t=5707)

beretta136

03-10-2012 06:06 AM

The French Firebird

Hello everyone,

I thought this forum was missing some french people so here I am. :lol:

More seriously, I am living in the south west of France and I recently bought a 71 pontiac firebird which is in need of a ground up restoration. There is a lot to do regarding sheet metal.
I posess the basic tools : hammers and dollies, shrinker/stretcher and a mig but I still miss some practice and advice regarding metal shaping.

That's why I enroled...

See you on the forums

Julien

Bill Hartson

03-10-2012 08:31 AM

Welcome to the site Julien

HEATNBEAT

03-10-2012 10:27 AM

Hi and welcome Julien!:D

Peter Tommasini

03-10-2012 09:01 PM

HI Julien and welcome to the forum
Peter

All times are GMT -5. The time now is 04:01 AM.