My Intro from South Africa
 

Hi Guys,

I've just joined up and would like to introduce myself;

My name is Gino and I am in South Africa, live in Pretoria and have worked for BMW South Africa as an Engineer for the past 24 years!

However, I have always had an interest in American cars; Hot Rods in particular and have been lucky enough to have owned a few.

Like most guys who work for a living, the 'old' project has to move on before the 'new' one takes it's place, and so I had to way goodbye to the '50 Merc, before welcoming the '34 Ford 5W.

I have developed a keen interest in metal-shaping/working over the past few years, and have scanned the Internet for information on the subject.

I also purchased some Tools from Williams Low-buck tools, and have since manufactured some parts for various cars.

It was for the above reason I found the allmetalshaping site, and hope to learn as much as I can from being a member:)!

Kind Regards

Hi Remmo, welcome to allmetalshaping!

David

Welcome to AllMetalShaping Remmo. We have 6-7 of your countrymen on here. I'm sure they'll be along shortly.

hi and welcome Gino!:D

Hi and welcome Gino.

Sorry to hear the Merc left you, I have heard that the '34 is going to be pretty cool though....

Welcome here, lots of good info. I am in Centurion :) Post frequently and add pictures :)

Rgrds

Welcome Gino. This is a fantastic site with helpful members.

welcome
 

Welcome GINO, i used to work with another metal shaping South African here in the states. S A BOER was his license plate.have fun with the site.

Welcome Remmo,

Hope to learn from your experiences too.

Welcome Remmo, good site to learn from.