All MetalShaping - Introduction

All MetalShaping (https://allmetalshaping.com/index.php)

- Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)

- - Introduction (https://allmetalshaping.com/showthread.php?t=7422)

amoros

11-25-2012 03:57 AM

Introduction

Name is Arnold. I'm in NC, Novice to metal shaping, Looking to learn from you guys.

Main reason is that I bought a 37 Lincoln that is a 4 door, and would like to convert it to a 2 door and will have to create a roof and possibly an trunk lid for it.

Peter Tommasini

11-25-2012 06:39 AM

HI Arnold welcome to the forum
Peter

HEATNBEAT

11-25-2012 10:58 AM

Hi Arnold and welcome!:)
Do you have any pictures of your car?

David Gardiner

11-26-2012 06:16 AM

Welcome to the site Arnold!

David

amoros

12-05-2012 11:59 PM

Thank you.

Here's a pic of it. Although I may be buying another one since the parts on these things are so rare. Its kinda cheaper to buy another car.... Unfortunately. So may have to sell this one soon.

If you see a picture.. means I figured out how to post one.

https://lh4.googleusercontent.com/-p...7/SAM_4993.JPG

All times are GMT -5. The time now is 02:36 AM.