All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)
-   -   New member (https://allmetalshaping.com/showthread.php?t=8558)

show car builder 04-08-2013 08:06 PM

New member
 
Hi,I am Dave Bertch and from Webster, NY. I have retired after 34 years of doing school bus repairs. I have set up a nice shop and have been building street rods. The last car I did had placed in the top 100 out of 8,000 at the show. All the work was done by me. Start to finish. I am now starting another build. This car will is also hand made. I have done the rear suspension with an independent rear from a 85 Mecure. I have made all the radius arms for it. The next thing is to make the frame. This will be made from flat stock and welded together.

Dave

HEATNBEAT 04-08-2013 10:37 PM

Hi Dave and welcome!:)

Peter Tommasini 04-09-2013 08:43 AM

HI Dave welcome to the forum
Peter


All times are GMT -5. The time now is 07:51 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.