new guy from MS
 

I've been too busy with life to pursue hot rodding and restoration type stuff for many years. I had sold off all of my old cars and really missed the work. I have a couple of old International Scouts and an old jet boat that need some attention now. I'm remodeling my garage / workshop and have been looking for ideas on tools, storage and whatnot. I found several links to this site from other forums and decided to join. I've been collecting scrap metal and a few electric motors figuring I would build some tools. I don't expect to be able to contribute much other than maybe asking a good question now and then but we'll see how it goes.

Hi Noel
Welcome hope you find something helpful here

Steve

Hello Noel, welcome to allmetalshaping. Life often gets in the way of doing things you enjoy but good luck with your projects.

David

Noel, welcome and thanks for the introduction. Hope you enjoy the site and fond it helpful. I am on the Gulf Coast and if you are in the area look me up and I will give you a nickle tour of my shop. Thanks for joining us.

Hi Noel and welcome!:)

Hi Noel welcome to the forum.
If you need any info about metalshaping or tools or ''how it works'' all you need to do is ask someone will help you
Peter

Good morning, welcome to the site. There is a lot of good help here. Plenty of good people as well.