All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)

- Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)

- - Newbie (https://allmetalshaping.com/showthread.php?t=9785)

OutlawGarage

10-02-2013 06:31 PM

Newbie

Hi, I'm Travis owner of Outlaw Garage in Glendale,AZ.
I'm looking for some plans on building a bead roller for my shop.
I seam to do a ton of rust repair and would like to learn more about metal shaping to make some of my own repair panels.

Thanks, Travis

Peter Tommasini

10-03-2013 12:18 AM

Hi Travis welcome to the forum
Peter

David Gardiner

10-03-2013 12:59 AM

Hi Travis, welcome to the forum.

David

luscten

10-03-2013 06:28 PM

Welcome to the site. You will find a lot of great information here. I just bought a set of plans for a beadroller. This is the link ebay.com/itm/271284444917?ssPageName=STRK:MEWNX:IT&_trksid=p398 4.m1439.l2649

Randy Tait

All times are GMT -5. The time now is 01:16 PM.