All MetalShaping - new to forum

All MetalShaping (https://allmetalshaping.com/index.php)

- Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)

- - new to forum (https://allmetalshaping.com/showthread.php?t=9821)

boober

10-08-2013 01:46 PM

new to forum

hi,i am a panel beater living in the uk have interests in all old cars
and sheet metal shaping.
i am building a power hammer air powered,i got the plans built the frame
all i need are the dies.any suggestions

Mark

Maxakarudy

10-09-2013 03:08 PM

Hi Mark,

Welcome to the forum, there's quite a few members in your area as we'll as Geoff Moss at MPH Panels who teaches panel making old skool:D
Have fun reading the years of info on this site.

David Gardiner

10-09-2013 03:46 PM

Hi Mark, welcome to allmetalshaping. I am also in the UK. You will find lower dies on eBay here.

http://m.ebay.co.uk/itm/330782811233...id=36620320013

Sounds like a planishing hammer you are building, is that right?.

David

Peter Tommasini

10-09-2013 05:28 PM

Hi Mark welcome to the forum
Peter

Members on the forum will be able to help you with the dies :D

All times are GMT -5. The time now is 04:19 PM.