Welcome George,
And since you are a chrome plater, I have a question about nickel plating that goes under the chrome.
With a Ni chloride + Ni sulfate + Boric acid bath, what can a DIY plater use as a brightener? I've heard that saccharine will work, and possibly maple syrup. Commercial users buy brightener from suppliers ready to mix in, and the ingredients are proprietary, sold in 5 gal buckets. Since my tank is 2 gallons, I need about a table spoon or so. Thus my question about saccharine.
Also, have they come up with a trivalent chrome that is the equal in appearance and mechanical properties to hexavalent?
This is a little outside the scope of metal shaping, but when trying to restore dented motorcycle tanks and other small parts, it becomes an issue to consider.
You will like this site, the ability pool is vast and deep.
CZ
__________________
Jerry Roy
|