Hi Carl
Welcome to Allmetalshaping.
looks like you have been around the block a few times. even around many blocks in many cities and in many states.
very impressive back ground.
like all of the other skillsets you have ventured into there is a learning curve. it appears that you will dedicate the time required to gain the required talent, so your goal seems to be a reasonable one.
Classes are available at many locations around the USA. the instructors vary in skill level and the equipment that they specialize in.
I would suggest that if you want to get a chance to rub elbows with some talented shapers, and a chance to tryout some metalshaping equipment, you attend an event.
from the home page scroll down to EVENTS
the one closest to you is the Redneck Roundup in Belfast TN in Aug.
James Hery is the host and there is contact info on that page.
__________________
Steve Hamilton
Hamilton Classics
Auto Restoration & Metalshaping
|