WOW that price is robbery!
i pay an average of $38 per sheet based on my last order of 0.8, 1.0 and 1.2mm! I think the 0.8 is $32 and the 1.2 is $43
The plain cold rolled is the CSA2 grade and will work well. I mainly use the CSA3 for my mudguard rolling machines because the material needs to shrink and stretch at the same time and it reduced the amount of reject mudguards greatly. The diference is noticable when you grab scraps without knowing which grade you have.
when I am onto my supplier next i will ask them if they carry stock in NSW and let you know. I use one steel as a main supplier of CSA3 sheet.
regards
Dave
Last edited by Dave Hatcliffe; 01-01-2011 at 08:09 PM.
|