Thanks a lot Marcus!
I am trying to do my best on it, doesn't want to do a show car but a (really) nice driver
To answer your question: I replaced the entire fuel line with a new one that I tested. All the tubes that I repaired as seen on the pic are only for cables like gas, clutch, heater,..
So, let's continue the topic
Now that the bottom was ready, time to turn the frame and do the same, clean and primed:
And then I started to adjust the half pan:
Used the future heater channel to adjust:
And then after cleaning/primering the half pan, it was time to weld them:
I also finished to clean/put in primer the back end:
To be continued
Antoine