Thread
:
Porsche 914..to be properly fixed!
View Single Post
#
40
02-25-2022, 03:56 PM
Antoine_P
MetalShaper of the Month August 2020, Sept 2022
Join Date: Feb 2019
Location: Stuttgart, Germany
Posts: 294
So, as promised, the work on the driver's side!
After a bit of Paint/gravel protection removal, it wasn't looking promising:
And not much better without the jack point triangle :
So I prepared the floor pan:
And made some cut:
Now I could see the damages better:
So I made a template :
And the part, from cutting to adjusting to welded:
Then some repair on the inner firewall:
And the pan:
And its reinforcement:
And the triangle, no chance to repair the old one so I made a new one:
And that is one side done:
Stay tuned
Antoine
__________________
Antoine Puygranier
Resurrecting a 60 ghia:
http://www.allmetalshaping.com/showthread.php?t=18852
Fixing a 914:
https://allmetalshaping.com/showthread.php?t=20624
Antoine_P
View Public Profile
Send a private message to Antoine_P
Find all posts by Antoine_P