Thread
:
Altered 34 Ford Dragster front in aluminium
View Single Post
#
10
02-15-2023, 10:45 AM
schönheit der arbeit
MetalShaper of the Month
Febuary 2012 , March 2023
Join Date: Mar 2010
Location: Karlstad in Sweden
Posts: 219
i drilled all these holes twice plus deburring from both sides .
then i added this little reverse lipp att the end of the hood , mostly hammer and dolly work
next upp where some bodylines , both to stiffing upp the sidepanels and to add some style . these side panels interfered with both of my beadrollers , but no problem . i hade already made attachments to use my beadroller dies in the english wheel . that works good . the top die is driven by a normal 3/8 ratched and the lower dies is mounted with bearings . by gradually raising and decreaseing the pressure between the dies i made the bead disappearing into the panel . after that i added a corner radius att the lower end , using rollover dies in the beadroller .
__________________
SILVIO KÜHNAST
Follow me on INSTAGRAM " SILVIOSWORLD"
Last edited by schönheit der arbeit; 02-15-2023 at
02:07 PM
.
schönheit der arbeit
View Public Profile
Send a private message to schönheit der arbeit
Find all posts by schönheit der arbeit