Hi Chris.
Those floors are pretty easy to do, no shape in the front floor sections as they are flat, except for memory the back part of the front floor has a hollow(Like foot well incorporated) into it and curves to the tunnel which is short. Its easier to make from 2 pieces and run a joggle inline with the B Pillar. The one I did had a support running under the floor from around 100mm from the handbrake.
I just plug welded the joggle of the 2 floor sections to that. Bead rollered the floor panels (series of square and rectangles) Tipped the edges to the sills.
By the way, if the sills are stuffed, there a 5 piece panel, so order must be adhered to to produce factory look.
I can't tell you how the area where the back seat, as the one I did was OK and didn't need any work there.
__________________
John
EK Holden V8
|