View Single Post
  #40  
Old 04-25-2021, 11:55 AM
chrisnz chrisnz is offline
MetalShaper of the Month July 2021
 
Join Date: Jan 2017
Location: Te Puke, New Zealand
Posts: 186
Default

Quote:
Originally Posted by Gojeep View Post
Very nice work.
Just make sure you put a straight edge across the template to make sure it sits in there dead flat. You don't want any tension in the glass afterwards.
I also used a straight edge on the flanges top to bottom to make sure they were in line as well.
Thanks Marcus. Been mindful of the opening and the glass. If there is some discrepancy, the urethane will hopefully even it out.
__________________
Chris Woolley
Reply With Quote