View Single Post
  #33  
Old 03-01-2018, 04:14 PM
AWM AWM is offline
Member
 
Join Date: May 2013
Location: Dora, Al
Posts: 41
Default

pulled a couple of students off the caddy to start on this T tub
owner bought a few replacement panels to give us a head start
they will need modified to work. We will have to fab the lower rear section on the tub sides. The replacement wood kit will be ordered soon, just getting a head start on the metal.
the rear body replacement part will need the upper belt added from the original, then we will make the correct bend at the bottom
we do what we can with the tools we have here at school
the lower portion of the tub has some very poor patch work, some places have 2 patches in the same spot, this proves that something can at least serve as an excellent bad example. Luckily most of the patch work was spot brazed and riveted over the original metal making removal very simple.
Name:  model t 3.jpg
Views: 1260
Size:  77.6 KB

Name:  model t.jpg
Views: 1348
Size:  80.4 KB
__________________
Anthony

Last edited by AWM; 03-01-2018 at 04:27 PM.
Reply With Quote