|
|
|
#1
04-23-2014, 11:57 AM
|
|||
|
|||
Yet another new guy
Hi all, interested in learning about the tools for metal shaping. I am restoring a 69 Cutlass, 442 and Hurst Olds that I will need to repair several issues with the current sheet metal on each car. Thanks in advance for any help that you may give me.
Mark
__________________
Mark Prachar 
|
|
#2
04-23-2014, 03:05 PM
|
|||
|
|||
|
Hi Mark welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
|
#3
04-23-2014, 07:58 PM
|
||||
|
||||
|
Hello Mark and welcome.
You will find plenty of help here. Jere
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer.  Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver.
|
|
#4
04-24-2014, 12:03 AM
|
|||
|
|||
|
Welcome Mark. You can do a great deal with very few tools. Understanding a few basic techniques and a few basic tools and lots of practice will get you under way.
David
__________________
Metalshaping DVD. www.metalshapingzone.com Metalshaping with hand tools on youtube http://www.youtube.com/watch?v=IGElSHzm0q8 All things are possible.
|
 |
|
|
Linear Mode
