|
|
|
#1
05-09-2010, 04:30 PM
|
||||
|
||||
New member from Ontario, Canada.
Hello everyone,
My name is Shayne and I am from Uxbridge, Ontario. I have absolutly no experience with metal shaping at the moment. But being as though I am into hot rodding especially pre 1940 fords, I have a need to learn. I am looking forward to being a part of this forum. Thanks guys 
|
|
#2
05-09-2010, 04:35 PM
|
||||
|
||||
|
Ohh, I almost forgot. I was wondering if someone could point me in the direction of some good reading for beginners. I have no knowledge to speak of and would like to get started on the right foot with basic terms, tools and techniques. Thanks in advance.
|
|
#3
05-09-2010, 04:48 PM
|
||||
|
||||
|
Welcome aboard.
Do a search on shrinking, stretching, welding and patterns. Those are some of the basics on metal shaping.
__________________
Johnny Arial This forum is dedicated to Metal Shaping. Please stay on topic.
|
|
#4
05-09-2010, 06:19 PM
|
||||
|
||||
|
Welcome aboard from a fellow Ontarian in Markham.
Too bad you just missed the Southern ON meet, but there will be more. If you felt like some hands on instruction, I could show you how to make patterns, tuck shrinking with a stump.
|
|
#5
05-09-2010, 06:30 PM
|
|||
|
|||
|
Shayne, You should take up Pugsy on his offer of some basic metal work knowledge. The only bad thing about him is he is the energy bunny of metalworking and he will wear you right out.Kidding aside Pugsy would be a good teacher and someone close who you could interact with for idea of both equipment and how to do things. Dutch
__________________
Dutch Comstock 926 Shells Bush Road East Herkimer,N.Y. 13350 (315)866-3034 comstockmetalshaping.com
|
|
#6
05-09-2010, 07:08 PM
|
||||
|
||||
|
Shayne, welcome, happy that you joined us. We all started knowing nothing it just takes time and the desire to learn. I agree with Dutch, take Pugsy up on his offer it will save you a lot of time in learning the basics.
__________________
Joe Hartson There is more than one way to go to town and they are all correct.
|
|
#8
05-10-2010, 11:39 AM
|
|||
|
|||
|
Welcome Shayne,
I'll throw out the same offer as Pugsy. I am located in Newmarket...not too far from you. I work out of my garage making motorcycle parts (tanks, fenders etc) using basic handtools, stump, ewheel, and gas welding.
__________________
Derrol Salmon
|
|
#9
05-10-2010, 09:20 PM
|
||||
|
||||
|
Thanks for the kind words Johnny, Dutch, Joe and Sean. I am very excited to learn something. Pugsy I would absolutly love to let you show me the basics. Never in my life have I turned down an opportunity to learn something. I just ordered a David Gardiner dvd and have started some searching to get a grasp on some terms and concepts. Hopefully this weekend I can get a chance to watch the dvd and do my research so that I would have a slight grasp of the things you could show me. So maybe some time after that I could arrange to meet with you. I would be willing to compensate you for your time some way or another.
Also to Derrol, I would be very interested in working with you as well. It sounds like you have something very cool going on in your garage. Any knowledge I can learn would be greatly appreciated. I would be willing to compensate you as well. Thanks everyone Last edited by bloodsweat&gears; 05-10-2010 at 09:25 PM.
|
|
#10
05-11-2010, 04:56 PM
|
|||
|
|||
|
Welcome Shayne.
I have not beem on here for a few days so late hello. Thanks for buying the DVD. I hope you like it. David
__________________
Metalshaping DVD. www.metalshapingzone.com Metalshaping with hand tools on youtube http://www.youtube.com/watch?v=IGElSHzm0q8 All things are possible.
|
 |
|
|
Linear Mode
