|
|
|
#1
12-31-2015, 02:54 AM
|
|||
|
|||
New guy from Indiana
Hello all,
I came here looking for Ideas on building a bead roller and who knows what else. I recently acquired a good amount of steel in the form of structural steel and think I could build a fairly good sized roller with a deep throat. I may have enough left over for something else useful for metal working like a English wheel or something like that. I have access to a lathe and have a milling machine and welder my puny garage. I am new in the area of using the bead roller and things like that, but I think it's time to step up my projects a level with the luxury these machines would give me. I have a couple big home projects coming up that would benefit greatly for having expanded metal working capabilities. I need some panels to finish off the bed I built on my little truck.  I need to finish off my Daughters Bronco       And slew of of other projects that have me always busy
__________________
Ed 
|
|
#2
12-31-2015, 07:31 AM
|
|||
|
|||
|
Welcome to the forum Ed.
__________________
Will
|
|
#3
12-31-2015, 04:35 PM
|
||||
|
||||
|
Hello Ed and welcome to the site.
Take a look at some of my bead roller videos on my web site. Jere
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer.  Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver.
|
|
#4
12-31-2015, 08:15 PM
|
|||
|
|||
|
Hi Ed welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
 |
|
|
Linear Mode
