|
|
|
#1
02-07-2011, 11:30 PM
|
||||
|
||||
New guy from N. California
I have bin building cars since 1963 when I worked for Shelby. I worked for STP Corp. during the 69 and 70 seasons building the MacNamera Indy cars. Since then I have done many street roadsters and restorations for customers. In 1973 I became quite interested in Blacksmithing and have bin at it every since. I build all of my own machines, specialty hammers, and dollies. I am quite excited about joining this group and gaining much more knowledge of the art of metal shaping.
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer.  Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver. 
|
|
#2
02-08-2011, 01:02 AM
|
||||
|
||||
|
Jere, welcome to the site, glad to have you as a member. Lots of information here to learn more about metal shaping. Sounds like you already have a good background. Looking forward to seeing some of your work. Thanks for joining us.
__________________
Joe Hartson There is more than one way to go to town and they are all correct.
|
|
#5
02-08-2011, 11:57 AM
|
||||
|
||||
|
Torches
Yes John I sell the HenRob (now known as Cobra) torches and carry all the parts. I also teach welding aluminum and stainless steel with the torch. If you need any new tips or repair parts look at www.jerekirkpatrick.com.
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer. Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver.
|
 |
|
|
Linear Mode
