|
|
|
#1
10-30-2011, 08:44 PM
|
|||
|
|||
Flipper_1938 is on here now
Hey guys.
I was directed here by a link on the HAMB that showed an awesome transmission tunnel. I'm currently building a boat-tailed speedster from "almost scratch". The big pieces of the tail started out as a 54 Cadillac roof. I was hoping to put the rest of the body together out of found shapes, but I think that may be an unrealistic task. Metal shaping will be required. Here's a link to what I've done with it so far. http://www.jalopyjournal.com/forum/s...ghlight=roofus Richard Ramsey 
|
|
#3
10-30-2011, 10:55 PM
|
|||
|
|||
|
Welcome to the site Richard
 Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
 |
|
|
Linear Mode
