Hello from Sweden

[Anders Nilsson]

Hello.
My name is Anders Nilsson. I live in Sweden. I have been interested in metalshaping in about 10 years, but dont have that much practice. Still a beginner. Have build my own english wheel. I olso a planishing hammer, bead roller, shrink and stretcher, sheet metal break. And some hand tool. Want more shaping tools, but i have take a little at time. The project i working on now is a Mercedes 450 se, and is almost finnish with a volvo amazon (Think its only called 121 in US). The mercedes is now waiting on me to build a tractor driven compressor, so a can sand blast the floor, prior to epoxy paint. On the days a work as a service engineer.

Best regards Anders

[dave g]

hi anders welcome to metalshaping

[Ken Hosford]

Are the Anders who spent some time in he early 70s in ann arbor michigan ?

[HEATNBEAT]

Welcome to Allmetalshaping Anders!

[David Gardiner]

Hello Anders, Welcome to allmetalshaping.

David

[Peter Tommasini]

Welcome to the site Anders, it would be nice to these some photos of your equipment that you have built

[Anders Nilsson]

Originally Posted by Ken Hosford

Are the Anders who spent some time in he early 70s in ann arbor michigan ?

Sorry, but thats not me.
//Nilsson

[Anders Nilsson]

Originally Posted by David Gardiner

Hello Anders, Welcome to allmetalshaping.

David

Thanks.
Have your DVD. Liked it alot. Have some books but its easier to learn from a DVD. But a feel i have to asking olso, so i joined this community. Its hard to ask books and DVDs
//nilsson

[Anders Nilsson]

Originally Posted by Peter Tommasini

Welcome to the site Anders, it would be nice to these some photos of your equipment that you have built

Will upload some picture this weekend, so a can get some input. Build it from pictures in bookas and internet, so a have a little lack of advice, so its wheel with improvment needs

Thanks you all for welcome me!

//nilsson

[Anders Nilsson]

DSC00486.jpg

DSC00487.jpg

DSC00488.jpg

Some picture of the english wheel a have built some years ago. The rod where the little wheel is attach, is a fork leg from aHonda cbr900. But a have alot of training to do.