|
|
|
#1
03-05-2015, 07:52 AM
|
|||
|
|||
New from Sweden
Hi all!
My name is Anders and I'm from Sweden, I stumbled across AllMetalShaping when I was looking for plans and info on building a 427 S/C body buck. As far as it comes to metal shaping I believe that I have little to contribute and lots to learn  I'm currently building a Cobra replica based on a kit from Sweden. To make the chassis to my own requirements I had to learn how to TIG weld using an ancient Miller. It's a spaceframe chassi and a GRP body. It will be propelled by a single turbo Ford 5,0 H.O. and a Tremec TKO 600. Suspension is Corvette C4.
__________________
Anders Klingberg Current project: AC Cobra 427 S/C 
|
|
#3
03-05-2015, 05:20 PM
|
|||
|
|||
|
Quote:
Tackar Borde vara en del svenskar som kollar runt här med tanke på alla olika byggen som finns.
__________________
Anders Klingberg Current project: AC Cobra 427 S/C
|
|
#4
03-05-2015, 05:39 PM
|
|||
|
|||
|
Hi Anders welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
 |
|
|
Linear Mode
