|
|
|
#1
11-15-2011, 09:48 AM
|
|||
|
|||
Greetings from Chattanooga
Hi there,
I'm Greg Cunningham located here in Chattanooga, TN. I have been working with antique cars since I was 15yrs old- over half my life. I started working for a small musuem in my hometown in Oklahoma. From there, I learned many aspects of car care and restoration. But, my favorite part has been metal shaping. Maybe because it is the most challenging or "mysterious". I think its really neat to be able to stand back and see something that you made from nothing. I worked under Dennis Francis for a while. I learned concepts and theory from him. Then I ended up with my own restoration business for about 10 yrs and was able to practice the skill hands-on. I have watched alot of videos by Kent White along the way! And, I have built alot of scrap over the years- haha! Now I'm in Chattanooga, TN working for Honest Charley Garage and Coker Tire. We are constantly making some sheetmetal parts for custom work or restoration. I believe this will be an interesting forum that can help us to problem solve and, of course, network with others who have the same passion. Thanks for having me here and I look forward to our interaction. Greg Cunningham
__________________
Greg Cunningham - Honest Charley Garage 
|
|
#3
11-15-2011, 12:43 PM
|
|||
|
|||
|
Hi Greg welcome to the forum. Sounds like you have had some interesting jobs through the years.
David
__________________
Metalshaping DVD. www.metalshapingzone.com Metalshaping with hand tools on youtube http://www.youtube.com/watch?v=IGElSHzm0q8 All things are possible.
|
|
#4
11-15-2011, 08:10 PM
|
|||
|
|||
|
Welcome to the site Greg
 Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
 |
|
|
Linear Mode
