|
|
|
#1
04-07-2013, 11:10 PM
|
|||
|
|||
Hullo all metal lovers!
Hi
I'm Bruno Samuel from Sweden. I'm a retired ingeneer from constructing buisnes I am a member in a garage were we are 4 guys with the hobby of old cars and bikes. We've just extended our garage so we have a room for some new metal machines. We're planning to build an english wheel and need good advice and tip. Futher on I have plans to build Art deco car type Talbot teardrop on a chassie From a car with frame type Caprice or similar. In Sweden you can get a car like that registrated as a rebuild car which means no tax. Look forward to many contacts and tip from your site! Med vänlig hälsning Bruno
__________________
Bruno Ekehed My goal is to build a Art Deco car on a chassie from a framebuild car. I have been through a course on the English wheel an planning to buy one. 
|
|
#3
04-08-2013, 05:13 PM
|
|||
|
|||
|
HI Bruno welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
|
#4
04-08-2013, 07:09 PM
|
||||
|
||||
|
Welcome to AllMetalShaping Bruno.
Before you get too carried away planning on using a modern full size chassis, take a look at http://allmetalshaping.com/showthread.php?t=145&highlight=Deco I did about everything wrong you can imagine...several times... including starting with a existing frame and not taking the time to build a body buck or wireform.
__________________
Kerry Pinkerton
|
 |
|
|
Linear Mode
