|
|
|
|
|
#1
11-25-2014, 04:35 PM
|
|||
|
|||
Introduction, building an E wheel in Kansas City
Hello, I've been building an E wheel starting with the wheels, I'm about ready for the frame, this will be plate with smooth curves. There is plenty of time to think up shapes standing in front of the lathe. The first projects are cowlings some new and some repairs (mostly Cubs).
THANKS ERIC
__________________
Eric 
|
|
#2
11-25-2014, 06:05 PM
|
|||
|
|||
|
Welcome to the forum, Eric.
__________________
Will
|
|
#3
11-25-2014, 10:49 PM
|
|||
|
|||
|
Thank you, I can't wait . This is the first and only forum I have joined or for that matter, ever wanted to be part of. This site reads very positive. Many years ago my favorite restaurant was an odd little hole, with signs posted throughout "BE NICE OR STAY OUT" with a 90 lb owner to enforce her proclamation.
Happy Thanksgiving Eric
__________________
Eric
|
|
#4
11-25-2014, 11:57 PM
|
|||
|
|||
|
Hi Eric welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
|
#5
11-26-2014, 02:11 AM
|
|||
|
|||
|
Welcome to allmetalshaping Eric.
David
__________________
Metalshaping DVD. www.metalshapingzone.com Metalshaping with hand tools on youtube http://www.youtube.com/watch?v=IGElSHzm0q8 All things are possible.
|
|
#6
11-26-2014, 06:14 AM
|
|||
|
|||
|
Hello Eric,
Welcome to the forum, i'm also building a E-wheel and found alot of info here not alone for the e-wheel for lots and lots of things..... Regards Wesley
|
 |
|
|
Hybrid Mode
