|
|
|
|
|
#1
08-05-2013, 07:13 AM
|
|||
|
|||
1968 Ford XT Falcon Ute Restoration
Hi All,
I've just started restoring a Ford Falcon Ute and knowing nothing about cars and sheetmetal fabrication I thought I'd better do some research on what tools I'll need to get the task done. It looks like I'll need a Bead Roller and an English Wheel so this site looks like a good place to start
__________________
Damo Should've bought a bigger shed Melbourne, Australia 
|
|
#3
08-05-2013, 05:14 PM
|
|||
|
|||
|
HI Damian welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
|
#4
08-05-2013, 05:30 PM
|
|||
|
|||
|
Pictures of the Ute and The first part I want to tackle
[ATTACH]ute.jpg
IMGP4802.jpg IMGP4803.jpg[/ATTACH]Car has a bit of rust but hoping with some blood sweat and lots of tears I should be able to bring it back to life
__________________
Damo Should've bought a bigger shed Melbourne, Australia Last edited by route56wingnut; 08-05-2013 at 06:15 PM.
|
 |
|
|
Hybrid Mode
