|
|
|
#1
12-08-2015, 11:09 AM
|
|||
|
|||
Stevie The Scotsman Introduction
Greetings,
I am an ex Royal Air Force Avionics Tech who has a passion for keeping older cars on the road. I have the diagnostics down and can mig weld however my metal shaping skills are non existant. Picked up the DVD by David Gardiner and have the metal bumping 'bible'. Have car projects where I am looking to be able to work with 20/22 gauge sheet metal and looking to use this site as a valuable resource. I am originally from Glasgow,Scotland but now live in Sunny Milwaukee Wisconsin,USA. 
|
|
#2
12-08-2015, 05:05 PM
|
|||
|
|||
|
Hi Stevie welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
|
#3
12-09-2015, 02:41 PM
|
||||
|
||||
|
Hello Stevie and welcome to the site.
Jere
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer.  Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver.
|
|
#4
12-09-2015, 06:01 PM
|
|||
|
|||
|
Welcome Stevie,
Sunny Milwaukee  Don't you miss the horizontal rain and battered mars bars back home mate?
__________________
Cheers Martin No matter how clever you think you are, stupidity is always one step ahead!!!!
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
