|
|
|
#1
03-17-2011, 03:07 PM
|
|||
|
|||
Hello from Belgium
My name is Henri
One year ago i started a complete restauration on a clasic mini .After one year the mechanical part off the job is done and i have to start the body work,it has a lot of rusted panels that have to be removed and renewed.So my friend jag2be told my aboud this site . And here i am, like to learn a lot from you guys . Henri GRobbendonk Belgium Last edited by fonzie; 03-23-2011 at 12:48 PM. 
|
|
#2
03-17-2011, 06:26 PM
|
||||
|
||||
|
Welcome Henri !!!!
Great site to have fun on. Thanks for joining!!!!!! Mark D
|
|
#4
03-17-2011, 11:25 PM
|
||||
|
||||
|
Hello Henri.
Any photos of the MINI?
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer.  Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver.
|
|
#5
03-18-2011, 01:02 PM
|
|||
|
|||
|
mini pics
Hello jere
Here are some pics from my mini . As you can see a lot body work has to be done . Floor panels sills wheel arches are corroded . To keep the door panels in place i made som reinforcements. I made some stand to make work on the body easy,so i can lift it 30 inch. DSC02245.jpg DSC02265.jpg DSC02267.jpg DSC02273.jpg DSC02292.jpg DSC02298.jpg DSC02302.jpg greetings Henri
__________________
Henri Last edited by fonzie; 03-23-2011 at 12:49 PM.
|
|
#6
03-18-2011, 01:10 PM
|
|||
|
|||
|
Hello Henri, Welcome to allmetalshaping.
David
__________________
Metalshaping DVD. www.metalshapingzone.com Metalshaping with hand tools on youtube http://www.youtube.com/watch?v=IGElSHzm0q8 All things are possible.
|
|
#7
03-18-2011, 01:20 PM
|
||||
|
||||
|
Thanks Henri:
Nice idea on the adjustable door support. Mind if I use that when I chop the top on my 56 Ford Pickup? Also nice stand for the car in photo #6. You could put some adjusters on it too to level everything out once the car is filly loaded. 
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer. Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver.
|
|
#8
03-19-2011, 01:34 PM
|
||||
|
||||
|
Welcome
You're not too far from where i live! My parents used to have a cabin in the woods in grobbendonk (although closer to pulle's town center)
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
