|
|
|
#1
12-11-2012, 10:30 AM
|
|||
|
|||
Introduction
Good day, I am Abrie van der Westhuizen from George ,South Africa.
i started looking into metal shaping about 2 years ago but never had the time. i am 34 years old an already built a 53 f100, a 23 t - bucket an a ac cobra. i would like to build my own aliminium body, but still have to learn a lot. this is a great forum and the information will help me . kind regards. Abrie 
|
|
#2
12-11-2012, 12:25 PM
|
||||
|
||||
|
Welcome to the site Abrie great place to find out how its done and the skilled guys here are only too pleased to put you on the right track. I also hope to build a cobra alloy body, just need to get my finger out.
Enjoy the forum.
__________________
Tom Poulter Follow the Dream - Sideways -  - But don't fall-off the edge'good to know you guys care' https://ctrestorations.com/
|
|
#3
12-11-2012, 06:04 PM
|
|||
|
|||
|
HI Abrie
Welcome to the forum Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
