Hello

[cutup1013]

Thank you, for letting me join this site I restore International Scout's and have a farm in NW Indiana. Iam sure this forum will help me and hope I can help also thanks. Bob

[HEATNBEAT]

Welcome Bob!

[Joe Hartson]

Bob, welcome and thanks for the introduction. IH Scouts are great trucks but do have a rust problem. My son is restoring a coupe now that we have made some panels for. Thanks for joining us.

[Bill Hartson]

Good to see you here Bob. I have seen you on the Binder Planet. I believe I responded to your floor thread over there. Make yourself at home here and ask questions there are lots of good helpful folks here. I am currently working on a 1975 XLC. Hopefully it will be running soon.

[46binder]

I go on the Binderplanet too! Addicted to IH's, I have a 1946 K2 thats half in paint, a 1971 Travelall thats my daily driver, and just bought a 1980 Scout, or whats left of it.

[cutup1013]

Thank you all, I have reading many threads and trying to get things in order at the farm [ then I will be dead LOL ]. This is the best source of sheet metal info I have ever seen so much talent here. I will be doing the floor pans on my 74 scout II soon any direction or things you wish you would have done in hind site would help. I have never done this task before,again thank you all for the welcome. Bob

[Joe Hartson]

Bob, the floor pans were make just like the factory pans with all of the flanges so they fit just like the factory. We also made and replaced the front body mount. The pans that you can buy don't have the flanges like the originals and don't fit as well. Maybe my son, Bill, can remember the thread where the pictures of floor are on the Binder Planet. He may still have the drawing he made that we used when we made the floor pans.

[Joe Hartson]

Bob, here is a link to the pictures of the floor and some other work on Binder Planet. http://www.binderplanet.com/forums/s...t=87033&page=3
Post 27, 28, 29, and 51 have the pictures.