|
|
|
#1
08-07-2011, 11:08 PM
|
|||
|
|||
New guy AH
Located in Southern Alberta Canada. Wanting to learn metal shaping. Building my E wheel & cp hammer was the easy part. Learning to use them is another story. My Current project is a Chevelle 300 restomod.
Brent 
|
|
#2
08-08-2011, 01:21 AM
|
|||
|
|||
|
Welcome Brent, Ive been using the wheel for 30 years and im still learning!! Have a look through all the great posts on this site and you will learn from others.
 Cheers Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
|
#3
08-08-2011, 03:42 AM
|
|||
|
|||
|
Hi Brent, Welcome to the site!. Like Peter said, as far as the wheeling machine goes you never seem to stop learning or have all the answers!.
There is a lot more to shaping metal than the wheel too!. David
__________________
Metalshaping DVD. www.metalshapingzone.com Metalshaping with hand tools on youtube http://www.youtube.com/watch?v=IGElSHzm0q8 All things are possible.
|
 |
|
|
Linear Mode
