All MetalShaping

Go Back   All MetalShaping > Metal Shaping Projects > Automotive Projects
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-18-2021, 03:41 PM
Antoine_P Antoine_P is offline
MetalShaper of the Month August 2020, Sept 2022
 
Join Date: Feb 2019
Location: Stuttgart, Germany
Posts: 292
Default Porsche 914..to be properly fixed!

Hi all,

After some years of dreaming about it, I bought myself a porsche 914.. Light, low, fun on curvy roads, love it..

So the car: originally from the US (sadly I know nothing about its history there), it is a 1974 1,8l 914 originally phoenix red. It was sometimes repainted, before 1991 when it was imported to the UK. It ran there until 2009, where it found its way back to Germany. And since october with me!

It looked like a good driver, which was my goal, as I want to enjoy it on the road during the restoration of my karmann ghia

my plan was:
-drive drive drive drive (made 1000miles the first month with it )
-in the future: paint it original color back, improve the handling (it still has no sway bars, shocks are quite old, frame stiffener will be ordered,..), some interior modification,.. goal is to keep it usable on the street, while lightening it where possible and putting some more power (I am in love with the sound of a 6 but might keep it a big 4 for weight and legal reasons..).

Some pictures from the start:






I made some changes, mostly removing all sound deadening material, changing old bushes, mounting a short shifter,.. A pleasure on the roads!
The short shifter:




And well.. The previous owner used is for less than 1000 miles in 10 years, only on sunny warm days..and as I did differently and drove it a lot and hard, some old "hack fixes" came on the surface.. I don't want it to become dangerous or too bad to be fixed..

So decision has been made, a few months break from the ghia and I fix it correctly to have a safe and reliable car. Start has been made yesterday:
First checking.. Under the long.. Well fiberglass was well hidden:




And on the inside under the belt fixation was also nicely fiberglassed


So.. The 914 is in my shop


And I made some more disassembly, and checked the B-pillar behind the sail panel where I expected a lot of work..
Passenger side is quite a good surprise, except this hole that could be foreseen:


And is real:


The rest is good


Driver side had developped some.. Let's say waves..




And here there are a bit more damages..




Well, I know the condition now, and nothing that really scares me

Then I built the necessary door braces, made to be able to keep the doors, in order to always be able to check the gaps


And mounted:


I made them in order to be able to keep the doors to always be able to check the gaps:




And I check further the inner firewall.. Holes on driver's side, bad repair on passenger's side..






Well, all in all I know more about the work to come, it has been a good first evening

Cheers

Antoine
__________________
Antoine Puygranier
Resurrecting a 60 ghia:
http://www.allmetalshaping.com/showthread.php?t=18852

Fixing a 914:
https://allmetalshaping.com/showthread.php?t=20624

Last edited by Antoine_P; 08-18-2021 at 04:05 PM.
Reply With Quote
  #2  
Old 08-19-2021, 04:04 PM
Pehr Pehr is offline
Member
 
Join Date: Jan 2020
Location: Öckerö Sweden
Posts: 63
Default Nice ride

Nice ride with not to much rust.
Congratulations
I will be following with interest
__________________
Pehr Norström
Reply With Quote
  #3  
Old 08-20-2021, 06:12 AM
Antoine_P Antoine_P is offline
MetalShaper of the Month August 2020, Sept 2022
 
Join Date: Feb 2019
Location: Stuttgart, Germany
Posts: 292
Default

Thanks Pehr! This ride will be fun, but first let's make it solid!

So, I removed more of the undercoating and it appeared to have some "fix" from the past on the long.. Well, let's see after cutting:








But before I go further there after engine removal, I started to remove the tank to be able to weld safely. I will also mount the sway bar in the same time, as well as change all fuel lines.
Here we are :


And because it's always good for the motivation, I made a first repair on my driver's sail panel, all TIG-welded






















Cheers

Antoine
__________________
Antoine Puygranier
Resurrecting a 60 ghia:
http://www.allmetalshaping.com/showthread.php?t=18852

Fixing a 914:
https://allmetalshaping.com/showthread.php?t=20624
Reply With Quote
  #4  
Old 08-21-2021, 03:33 AM
bill m bill m is offline
Member
 
Join Date: Dec 2014
Location: Melbourne Australia
Posts: 33
Default

The Porsche 914 is in good hands. I will enjoy watching your progress.
Bill.
__________________
Bill Mullen
Reply With Quote
  #5  
Old 08-23-2021, 06:31 AM
dwmh dwmh is offline
MetalShaper of the Month May 2018, July 2022
 
Join Date: Aug 2015
Location: Nr Oxford UK
Posts: 657
Default

Sad to see what looks a good car on top has been bodged so poorly underneath. I'm pleased you are up for the challenge.
__________________
David Hamer
Reply With Quote
  #6  
Old 08-29-2021, 10:43 AM
Antoine_P Antoine_P is offline
MetalShaper of the Month August 2020, Sept 2022
 
Join Date: Feb 2019
Location: Stuttgart, Germany
Posts: 292
Default

Thanks a lot for the Support! I am motivated and this car will turn great!

So, already a lot happened to the 914 this week!

I started upfront by pulling out the frunk seal to check the condition under it..


And I found holes after holes. I cut each of them and replaced with metal, I won't bore you with every single picture but here are a couple of examples, like here :








Or here:








Or here :








One last example:






Afterward I put some primer and some paint for complete protection:






As I was already working on the front, I removed the side markers and the antenna (no radio on a lightweight project !) :








And started the first part for my B-Pillar:






The next update comes as soon as I have some time to post it!

Cheers

Antoine
__________________
Antoine Puygranier
Resurrecting a 60 ghia:
http://www.allmetalshaping.com/showthread.php?t=18852

Fixing a 914:
https://allmetalshaping.com/showthread.php?t=20624
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -5. The time now is 04:32 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.