#1
|
|||
|
|||
1966 Buick GS
New guy here. Looking for some help/advice getting the rear quarter panel on my 1966 Buick GS repaired. This isn't one of you popular body styles that have readily available body/patch panel just a phone call away. I have found one NOS quarter several years ago but they wanted way too much for it. I do know where a few useable quarters are but will need some patch work at the bottom edges(where most do). This was my grandmothers car so I would like to bring this beauty back to life. If this quarter can be saved I'd like to save it. Dad always said it would take someone with metal working skills to be able get this thing back straight again. I think I have found the right site. Any suggestions or advice? Car is located in Baton Rouge, La area. Thanks, Todd
__________________
Todd Last edited by Steve Hamilton; 10-27-2014 at 02:31 PM. |
#2
|
|||
|
|||
Joe,
Thanks for talking with me today about this car. I appreciate all your help and assistance. I contacted Mike after I spoke with you. He is busy working on his own car but said he believes the panel can be straightened as well. And that I should be able to do it with the right tools. Since he is local to me he I'm going to load the car up and take it by there one day so he can look at it personally. He also gave me another persons name locally that I can contact. Anyway thanks very much for your assistance, Todd
__________________
Todd |
#3
|
||||
|
||||
Todd, if you get to the coast look me up and I will give you a shop tour.
__________________
Joe Hartson There is more than one way to go to town and they are all correct. |
#4
|
|||
|
|||
Still looking for someone down south somewhere that can help me get this quarter and the body straight on the car. Anyone know of someone? Willing to travel some for right person.
Thanks, Todd
__________________
Todd |
Thread Tools | Search this Thread |
Display Modes | |
|
|