#1
|
|||
|
|||
Four post hydraulic press for sale
Came out of GM’s prototype department many years ago.
Specs: Four 3” diameter polished alloy steel posts. 52” long x 37” wide bed. Beds are blanchard ground 2.875” thick steel with welded reinforcing ribs (approx 6” total thickness). Milwaukee 7” OD x 15” stroke hydraulic cylinder. 27.5” vertical daylight between upper and lower beds (lots of space for tooling and pressure plates). Surface ground V guides on upper/lower beds for high accuracy (e.g. shearing dies or pinch off dies). Four new adjustable machine feet. You will need to add your own pump/motor. Heavy duty, but reasonable size and weight for a small/medium fabrication shop. 4 post presses of this size can sell for $15,000 and up. Steal this one for only $1500. Local pickup in Ocala, Florida. I don’t have a forklift that will lift it, so you will need to bring one with you or rent one here in Ocala. If you are SERIOUSLY interested and not just a looky-loo, send me an email and I will gladly get you some pics. Last edited by john galt; 08-05-2022 at 10:51 AM. |
#2
|
|||
|
|||
sold!!!!!!!!
|
Thread Tools | Search this Thread |
Display Modes | |
|
|