#1
|
|||
|
|||
Greetings from Arizona
Hi all,
I'm Shawn from Tempe, Arizona. I've been a fabricator type for a while now with my metal work experience mostly in the hammerforming arena from an artist angle. I consider myself a sculptor/fabricator. I'm gearing up to see if I can form a 427 Cobra body. Ideally the nose for a wall hanger at minimum to even see if I can do this well in my current shop configuration. I'm have a very eclectic skill set. I just finished making my 2"X72" knife makers belt grinder and decking out my Woodward bead roller to all the fancy stuff that Jere Kirkpatrick recommends. I'm hoping to be able to learn a lot and provide helpful feedback here!
__________________
-Shawn Lindemood |
#2
|
|||
|
|||
Welcome
Making a Cobra nose for a wall hanger sounds like a great project, maybe I will take this idea and make a similar item for my shop walls.
__________________
Alan |
#3
|
|||
|
|||
Factory Five sells the front end as a wall hanger kit. So, it was easy to visualize. It also sounded like a good place to start.
https://www.factoryfiveparts.com/149...nose-wall-art/
__________________
-Shawn Lindemood |
|
|