All MetalShaping

Go Back   All MetalShaping > Metal Shaping Projects > Automotive Projects
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 08-19-2015, 09:53 PM
Jack 1957's Avatar
Jack 1957 Jack 1957 is online now
MetalShaper of the Month Dec . 2016, Sept 2019 Metal Shaper Of The Year 2021
Join Date: Sep 2014
Location: Strongsville,OH
Posts: 1,064
Default 1949 Cadillac Roadster Build

I'm going to document some extensive sheet metal work and frame modification on a 49 Caddy. This will be a start to finish project that will take years to finish. The beginning will be somewhat slow going but I think it will be an interesting build to follow. I've spent some time looking around this site and like the group of people here. I wasn't sure that this build would be welcome here until I came across a post by Admin Kerry Pinkerton directed toward Sergey who's building a 41 Chevy truck. He stated that a full build thread was welcome here. So, if you're interested, please follow along. Ask any questions and I'm always open to suggestions.

I started with tunneling the headlights. I got a headlight bezel from a 54 Stude to use as a guide. One tip I can offer for making templates for a complex or irregular shape is to use 3M weld paper. It is about as sticky as masking tape on one side and keeps its shape without stretching when you remove it. after transferring the shape to a piece of sheet metal and cutting it out, a little time on the wheel and shrinker and they're ready to fit to the fender. I also made the tubes with flanges that the headlight bucket will mount to. That's about as far as I got today.

I'll be using a rolled 1/4" rod for the leading edge where the inner and outer pieces meet. I have been reading some input from Marty Comstock ( a very knowledgeable welder here on AMS) and I think I will be gas welding this up using SiBr rod. I use this wire at work with a MIG Pulse welder and it is amazing.

Set a Goal So Big That You Can't Achieve It Until You Grow Into The Person That Can.

Last edited by Jack 1957; 07-10-2019 at 10:37 AM.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -5. The time now is 07:58 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.