Just recommended to you guys

[ELpolacko]

Thanks!

Yup, Helve. I have a friend here that built one a while ago and really impressed on what he can accomplish with it. I couldn't afford one of Baiglieh's power hammers, so I figured I could build multiple machines of my own design and maybe later buy one like theirs.

[bobadame]

It's good that you have made holes to bolt it down. It is going to want to jump a bit.

[red baron]

ELpolacko, I have seen your work on some other forums, you do some real nice work, glad to see you here!!

[ELpolacko]

Originally Posted by bobadame

It's good that you have made holes to bolt it down. It is going to want to jump a bit.

Yep, figured that out when I first started researching the builds on these. Also why I built it out of 3/8" stock and a 1/2" plate bottom and welded it with ESAB Dual-Shield 710X cored wire. Figured it might be under a bit of stress.

Originally Posted by red baron

ELpolacko, I have seen your work on some other forums, you do some real nice work, glad to see you here!!

Thanks man!

[Von Hitch]

Steve welcome to this site! Seen your build over on the Hamb glad to have you here I know you will be great asset to this site! Shinker stretchers are awsome!

[scranm]

very neat!!

[mmacmmac]

i checked out ur website. u got some nice work happenin there... good luck with years to come...