|
|
|
#1
12-30-2015, 05:25 AM
|
|||
|
|||
New member
Hallo everyone
My name is Wernher and I'm from Pretoria, South Africa. My dad and myself collect VW and Porsche's. Most of them are projects.I also research and record the air cooled history in South Africa. I started restoring our own cars 5 years ago, after realizing that there are few restorers out there that really care about doing it right. I see sheet metal shaping as an art form and respect the guys that can do it. One such person is Barry Ashmole, whom I've learned most of my limited skills from. I am here to learn and will try and contribute where I can. Thank you for having me on this forum and sharing your passion with me. Regards Wernher Hartzenberg
__________________
Wernher Hartzenberg 
|
|
#2
12-30-2015, 01:08 PM
|
||||
|
||||
|
Hello Wernher and welcome.
Jere
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer.  Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver.
|
|
#3
12-31-2015, 08:27 PM
|
|||
|
|||
|
Hi Wernher
Welcome to the forum Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
 |
|
|
Linear Mode
