|
|
|
#2
12-23-2015, 06:44 PM
|
|||
|
|||
Hi Andy welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM 
|
|
#3
12-24-2015, 10:12 AM
|
||||
|
||||
|
Hello Andy and welcome.
Jere
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer.  Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver.
|
|
#4
12-24-2015, 01:27 PM
|
|||
|
|||
|
Welcome to the forum, Andy
|
|
#5
12-25-2015, 05:55 AM
|
|||
|
|||
|
Hi Andy
Welcome to the forum. I used to work for an Andy Short, who did truck bodies in Cambridgeshire in the 1980's. I have a VibroShear nibbler and have made quite a few dies for it. I'd recommend you get Fay Butler's book on Universal sheet metal machines. He covers making dies and getting the most out of these machines. Happy Xmas Dave
__________________
David Hamer
|
|
#6
01-03-2016, 04:48 PM
|
|||
|
|||
|
Thanks all for the welcome, unfortunately Dave I'm not the same Andy Short that you worked with !
I will post some pictures of my previous and current projects in the next few days Andy
__________________
Andy
|
 |
|
|
Linear Mode
