|
|
|
#1
02-01-2011, 07:49 PM
|
|||
|
|||
Hello from the west coast.
Hello all. I am a former machinist turned shop teacher from Vancouver. I teach highschool auto and woodshop. I have made some metalshaping tools for the kids at school to use. Kids like to fabricate things out of metal, welding and fabricating works well in auto shop if you don't have room for the entire class to be working on cars. Lots of helpful information on the forums to make things happen!
Thanks Alan 
|
|
#2
02-01-2011, 07:57 PM
|
||||
|
||||
|
Alan, welcome and thanks for the introduction. Thanks for joining us. Hope you find the site enjoyable and informative.
__________________
Joe Hartson There is more than one way to go to town and they are all correct.
|
|
#4
02-02-2011, 04:17 PM
|
|||
|
|||
|
Heh Heh Heh
I had a bit of a chuckle today. I have kids weld up a dice out of 1/8 x 2" aluminum to try TIG welding. I gave the student the aluminum rod, but he thought the stainless rod would work better because it was smaller diameter. Didn't work much better at all! He actually got some of it to stick. Lesson learned.
Alan
__________________
Alan
|
 |
|
|
Linear Mode
