|
|
|
#1
10-07-2011, 04:04 PM
|
|||
|
|||
Introduction from Iowa
Hello my name is Kevin. I’m from Sioux City, IA I’ve been a member over at Metal Shapers Association and Metal Meet for a long time but I don’t post much. Everything I posted on Metal Meet was lost in the BIG crash.
Anyway I’m a welder by trade and I have a passion for motorcycle. After building a couple bikes and buying the tanks I thought I can do this! So I took Ron Covell’s class, built an English wheel and started banging out my own tanks. I work a full time job and work nights and weekends at the local custom motorcycle shop. Thanks.
__________________
Kevin “I hear and I forget. I see and I remember. I do and I understand.” ~ Confucious Last edited by chachi; 10-07-2011 at 11:13 PM. 
|
|
#2
10-07-2011, 05:02 PM
|
|||
|
|||
|
Hello fellow Iowan, welcome. I to came from Metalshapers and Metalmeet.( By the way, which crash, there have been so many?)
 Post up some pics of your work, we all love pics. Aaron
|
|
#4
10-07-2011, 11:08 PM
|
||||
|
||||
|
welcome Kevin, your only about an hour away from me. Great to have another shaper close by
__________________
Justin C My two and a half year olds solution if i dont have something..( go buy some)! Thats my boy!!
|
|
#5
10-08-2011, 12:39 PM
|
|||
|
|||
|
Here's a picture of the first 2 bikes I built. There both mine, the yellow one I started building in 1996 and its registered as a 98 the purple one is a 2000.
Thanks.2001_0602_193305AA.jpg
__________________
Kevin “I hear and I forget. I see and I remember. I do and I understand.” ~ Confucious
|
|
#6
10-08-2011, 08:31 PM
|
|||
|
|||
|
Kevin nice bikes!! I remember your post over on Metalmeet. Welcome to Allmetalshaping!! You ever get op to Sioux Falls I hope you look me up...
__________________
Jeff Dyce Hell, there are no rules here - we're trying to accomplish something. Thomas A. Edison
|
|
#8
10-09-2011, 05:40 PM
|
|||
|
|||
|
Welcome to the site Kevin.
David
__________________
Metalshaping DVD. www.metalshapingzone.com Metalshaping with hand tools on youtube http://www.youtube.com/watch?v=IGElSHzm0q8 All things are possible.
|
|
#9
10-09-2011, 07:29 PM
|
|||
|
|||
|
Welcome to All Metalshaping kevin
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM Last edited by Peter Tommasini; 10-09-2011 at 11:57 PM.
|
|
#10
10-09-2011, 09:01 PM
|
|||
|
|||
|
Thanks for the welcome everyone!!
David, I ordered your DVD last week and should get it this week. Thanks again!
__________________
Kevin “I hear and I forget. I see and I remember. I do and I understand.” ~ Confucious
|
 |
|
|
Linear Mode
