|
|
|
#1
03-26-2014, 03:52 PM
|
|||
|
|||
Fordman checking in
Yeah this is Steve. I am in Minnesota and I love working on old cars/trucks/snowmobiles. I have started to do more of the metalwork/bodywork on my own, so I thought I would join up to see the interesting stuff you pros do.
__________________
Steve First On Race Day 
|
|
#2
03-27-2014, 06:22 AM
|
|||
|
|||
|
Hi Steve welcome to the forum
Peter PS..... First On Race Day I second that 
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
|
#4
03-27-2014, 09:33 AM
|
|||
|
|||
|
I used to race Fords, and it was often the case where I took a 'First On Race Day' car to the track, but brought a 'Fix Or Repair Daily' home.
__________________
Will
|
|
#5
03-27-2014, 10:44 AM
|
|||
|
|||
|
Steve come on down to our spring event in Dennison and you can see all sorts of F--------in
old rusty Dodges Where are you in Mn. ?
__________________
Dan Pate
|
|
#6
03-27-2014, 07:32 PM
|
|||
|
|||
|
Steve,
Welcome to the group, lots of good information. I like the possibilities of seeing a custom snowmobile body in aluminum.. Rick, It may be "Fix Or..." or as Steve suggests "First..." but I once got a Galaxy with a signed title on the seat, "Found On Road Dead". After a tune up, battery, and oil change I drove it home, then changed the valve stem seals and gave it away as a wonderful car 3 years and 40 thousand miles later.
__________________
Doug
|
|
#8
04-01-2014, 10:58 AM
|
||||
|
||||
|
Hello Steve and welcome to the site.
Jere
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer.  Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver.
|
 |
|
|
Linear Mode
