|
|
|
#1
11-07-2013, 08:13 PM
|
|||
|
|||
new from wisconsin
noonyman here,Im restoring a 1952willys pickup truck.The roof was caved in and the floor was gone ,I fixed that stuff and Im thinking about making it a coe,need to make some round pieces and want the skill set to get it right.Might not be able to give any advice to others but sure aim to takewhat Ilearn here to heart and translate it to metal,thanks Paul
__________________
noonyman alias paul noonan 
|
|
#2
11-07-2013, 09:40 PM
|
||||
|
||||
|
Hello Noomyman:
Welcome to the site.
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer.  Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver.
|
|
#4
11-08-2013, 03:33 AM
|
|||
|
|||
|
Hi Paul welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
|
#5
11-08-2013, 03:56 AM
|
|||
|
|||
|
Hello Paul, welcome to allmetalshaping.
David
__________________
Metalshaping DVD. www.metalshapingzone.com Metalshaping with hand tools on youtube http://www.youtube.com/watch?v=IGElSHzm0q8 All things are possible.
|
 |
|
|
Linear Mode
