|
|
|
#1
09-19-2014, 04:12 AM
|
|||
|
|||
ancient
new member with an interest in shaping metal about 12 months ago i purchased a dvd ,bodywork restoration tutorial as i had bought a1936
chev utility i needed to learn how to repair the panel work ,through the purchase of this dvd i have spent a lot of time watching the metal shaping forum and i decided it was time to join up .A few details about myself, i am a young 77 year old ,originally a motor mechanic then a truck owner then into logging timber ,bulldozer driving,a timber yard ,recycled plastic factory. at present i am busy rebuilding the chev and building a 6metre plate aluminium boat .keeps me off the streets Jim 
|
|
#2
09-19-2014, 06:45 AM
|
|||
|
|||
|
Welcome to the Forum Jim
__________________
Will
|
|
#3
09-19-2014, 07:15 AM
|
|||
|
|||
|
Hi Jim welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
 |
|
|
Linear Mode
